Marine Fire System Services: Comprehensive Protection for Your Vessel

USCG & NFPA 302 Certified

Engine room fires move fast. Your suppression system needs to be flawless.

Marine fire suppression systems fail because they're neglected. Corrosion, discharged cylinders, and outdated components go unnoticed until it's too late. NFPA 302 and USCG regulations require annual inspections and 6-year system maintenance. We handle it all—Fireboy, Sea-Fire, Kidde systems, CO₂, clean agent, and engine room shutdowns. Your vessel's safety depends on it.

(727) 620-3473 Certification Requirements

Mon–Fri 8AM–5PM • Walk-ins welcome • NFPA 302 & USCG compliant

Marine fire suppression system inspection and service

NFPA 302 Compliant

Annual inspections required

Why Marine Fire Suppression Systems Fail

The marine environment is brutal on fire suppression equipment. Saltwater corrosion, temperature swings, humidity, and neglect create the perfect storm for system failures. Here's what we see, and how to prevent it.

Common System Failures

Saltwater Corrosion

Cylinders exposed to marine spray develop internal and external corrosion. Pitting weakens the pressure vessel, causing it to fail hydrostatic testing. System cannot be recharged and must be replaced.

Undetected Discharge or Low Pressure

A slow leak or accidental discharge goes unnoticed. The system looks intact but contains insufficient agent to suppress a real fire. Annual pressure checks catch this before it's too late.

Degraded Hoses, Tubing & Detectors

UV exposure, salt spray, and age crack hoses and corrode fittings. Heat detectors fail silently. System activates but can't deliver agent where it's needed, or doesn't activate at all.

Engine Shutdown Solenoid Failure

When fire is detected, the solenoid must shut down the engine immediately to allow suppression agent to work. A failed solenoid means the engine keeps burning fuel, overwhelms the suppression agent, and fire spreads.

What's at Stake

USCG Inspection Failure

Vessels undergoing USCG inspection must demonstrate compliant fire suppression systems. Failed inspection = vessel can be detained, cited, or prohibited from operating until corrected.

Insurance Denial

Insurance policies require proof of annual maintenance and certification. If your system fails and you can't prove compliance, the insurance company denies your claim. You cover the loss yourself.

Loss of Life & Property

An engine room fire at sea with a non-functional suppression system is catastrophic. The fire spreads rapidly in confined spaces. Crew safety is compromised. Vessel can be a total loss. No insurance, no repair—everything goes down with the ship.

Legal Liability

If a fire occurs and investigation shows the suppression system was not maintained per NFPA 302, vessel owners face negligence liability. Personal injury lawsuits, regulatory fines, and criminal liability are possible.

NFPA 302 and USCG regulations require annual inspections and 6-year system maintenance for a reason. Engine room fires are rare—but when they happen, seconds count. Your suppression system must be flawless. We ensure it is.

Why Serviced Fire Equipment Is Your Marine Fire Partner

We're not a general fire equipment shop. We specialize in marine systems and understand the unique demands of vessel fire safety.

🔧

Marine System Specialists

We service Fireboy, Sea-Fire, and Kidde engine room suppression systems—the industry standard. We understand CO₂ and clean agent systems, engine shutdown solenoids, heat detectors, and the NFPA 302 requirements that govern them. Not a guessing game.

✓

USCG & NFPA 302 Compliant

We're ABS Marine Fire Suppression approved and licensed by the Florida Fire Marshal (Class 01 & 04). Annual maintenance, hydrostatic testing, and system documentation meet all USCG and NFPA 302 standards. Your vessel passes inspection.

⚡

Fast Turnaround

Most annual maintenance completes same day. Hydrostatic testing happens on-site—no shipping cylinders to out-of-state facilities. Your system is back in service quickly, minimizing downtime.

Our Marine Fire System Services

Annual Inspections & Maintenance

Complete system inspection per NFPA 302. We verify cylinder pressure, test heat detectors, inspect hoses and tubing, check engine shutdown solenoid operation, and ensure all components function. Service tag documents compliance.

CO₂ & Clean Agent Recharge

If your system has been discharged (in training or actual use), we recharge with the correct agent and pressure. Work completes quickly so your vessel returns to full protection.

Heat Detector & Solenoid Testing

We test fire detection systems to ensure they trigger at the correct temperature, and verify the engine shutdown solenoid opens and closes properly. Silent failures are caught before they cost you.

DOT Hydrostatic Testing

Pressure cylinders require hydrostatic testing at regular intervals. We perform DOT-certified testing on-site. The cylinder is pressurized, expansion is measured, and integrity is verified. Results are documented and stamped.

System Repairs & Part Replacement

Damaged hoses, failed solenoids, corroded fittings, or detector issues? We repair or replace components to get your system back to spec.

Compliance Documentation

Every service generates complete documentation. Records show inspection date, next due date, technician name, and findings. Ready for USCG or insurance audit.

Your Vessel Depends on It

Marine fire safety isn't an option—it's a requirement. NFPA 302, USCG regulations, and your insurance all demand it. We've been serving Florida's marine community since 1999. We know the systems, we know the requirements, and we know what happens when they fail. Let us keep your vessel safe. (727) 620-3473 to schedule annual maintenance or discuss your system.

Marine Fire Suppression Systems We Service

We're ABS Marine Fire Suppression approved and certified to service the industry's leading engine room suppression systems. Whether your vessel runs Fireboy, Sea-Fire, or Kidde, we have the expertise and parts on hand.

Fireboy Engine Room Suppression Systems

Fireboy-Xintex is the world's leading manufacturer of automatic engine room fire suppression systems. Their CO₂ and clean agent systems are installed on thousands of vessels worldwide, from commercial fishing boats to superyachts.

What We Service:

Annual pressure & system checks
Heat detector testing and replacement
Engine shutdown solenoid verification
CO₂ and clean agent recharge
Hose, nozzle, and fitting inspection
DOT hydrostatic cylinder testing
NFPA 302 & ABS compliance documentation

ABS Certified: Authorized Fireboy service station with direct access to parts, technical support, and training. Your vessel's Fireboy system is in expert hands.

Sea-Fire Marine Suppression Systems

Sea-Fire specializes in automatic and manual engine room fire suppression systems using FM-200, FE-36, and CO₂. Used extensively on commercial vessels, workboats, and offshore equipment where reliability is non-negotiable.

What We Service:

Annual inspections & pressure verification
FM-200 and FE-36 agent recharge
Thermal and electronic detector testing
Manual and automatic system operation checks
Cylinder hydrostatic testing
Hose integrity & fitting inspection
NFPA 302 compliance certification

Expert Support: We understand Sea-Fire's dual-agent systems and manual override controls. Every system receives thorough testing to ensure it operates under real fire conditions.

Sea-Fire marine engine room suppression system

Kidde Marine Fire Suppression Systems

Kidde manufactures a wide range of marine suppression systems including CO₂, dry chemical, and clean agent solutions. Known for reliability and ease of maintenance, Kidde systems are found on commercial and private vessels worldwide.

What We Service:

Annual system inspections
Pressure gauge & pressure switch testing
Heat detector functionality verification
CO₂ and dry chemical recharge
Solenoid valve operation checks
Cylinder hydrostatic pressure testing
NFPA 302 documentation & ABS compliance

Full-Service Support: Kidde systems are straightforward and robust—and we maintain them to the same high standard. Your system will perform when it needs to.

ABS Marine Fire Suppression Approved

We hold ABS Marine Fire Suppression Approval, which means we meet the American Bureau of Shipping standards for servicing fire suppression systems on ABS-classed vessels. Our technicians are trained to ABS specifications, our documentation meets ABS requirements, and our work is recognized by class surveyors.

What This Means for You:

ABS surveyors recognize our work
Your vessel maintains class status
Documentation meets all ABS standards
No additional third-party inspections needed

Additional Certifications:

USCG compliant (46 CFR)
NFPA 302 certified
Florida Fire Marshal licensed
DOT hydrostatic testing approved

Request our ABS approval letter to verify certification.

We don't limit service to our facility. Our network of certified specialists handles on-site marine fire system inspections—engine shutdown verification, pull station testing, compartment CUFT calculations—across our entire service area. We coordinate all work, manage documentation, and ensure NFPA 302 and ABS compliance. Whether your vessel comes to St. Petersburg or we come to you, your system gets the same expert care.

Sarasota County service. Inspection, recharge, hydrostatic testing.

→ Learn More

Don't see your location? We likely service it. Our 90-mile service radius covers the entire Florida West Coast from Crystal River to Port Charlotte. (727) 620-3473 to confirm coverage and schedule service. Mon–Fri 8AM–5PM.

Authorized & Certified

ABS-Approved Marine Fire Suppression Expert

International

ABS Marine Fire
Suppression Approved

Class surveyors recognize our work

Federal

DOT-Authorized
Hydrostatic Testing
RIN D133

State

Florida Fire Marshal
Licensed
Class 01 & 04

Industry

NAFED & FFEDA
Active Member
Since 1999

Authorized Distributor

Your Vessel's Fire Safety Is Our Mission

Marine fire suppression systems don't get a second chance. NFPA 302 and USCG regulations demand annual inspections and 6-year maintenance. We ensure your Fireboy, Sea-Fire, or Kidde system is flawless—every time.

ABS-Certified Service

Your vessel maintains class status. Documentation meets all ABS and USCG standards. No additional third-party inspections needed.

(727) 620-3473 Email Us

Mon–Fri 8AM–5PM • Walk-ins welcome • Emergency repairs available

What We Service

🔥 Annual Inspections & Maintenance

System pressure, heat detector testing, engine shutdown solenoid verification, hose & fitting inspection. NFPA 302 compliant.

💨 CO₂ & Clean Agent Recharge

System discharged in training or use? We recharge with correct agent and pressure. Same-day service.

🧪 DOT Hydrostatic Testing

On-site pressure cylinder testing. No shipping to out-of-state facilities. Results documented and stamped.

🔧 System Repairs & Parts

Damaged hoses, failed solenoids, corroded fittings. We repair or replace. Direct access to Fireboy, Sea-Fire, Kidde parts.

📋 Compliance Documentation

Every service generates complete records. Ready for USCG inspection or insurance audit.